Maintain good metal laser cutting machine stability
Metal laser cutting machine in the process of running generally does not present too big a problem.However, we often need to maintain the equipment maintenance, and in the process of the operation of the equipment to pay more attention to some details above the problem.Maintain good metal laser cutting machine stability.
Replacement of circulating water and cleaning of water tank: ensure that the laser tube is filled with circulating water before the operation of the machine. The water quality and temperature of the circulating water directly affect the service life of the laser tube.So replace the circulating water and clean the tank regularly.Once a week.
The use of the fan in the machine for a long time, will make the fan inside the accumulation of a lot of solid dust, let the fan attack very loud noise, is not conducive to exhaust and odor.When the fan suction is insufficient exhaust smoke, it is necessary to clean the fan.
There will be some mirrors and aggregation mirrors on the machine.The laser is reflected through these lenses, focused and emitted from the laser head.Lenses can be easily contaminated with dust or other contaminants that can cause laser wear or lens damage.So clean the lens every day.
Clean together to pay attention to: the lens should be gently scrub, do not damage the surface coating;Scrubbing process should be taken lightly, to prevent falling;When assembling the mirror device, please keep the concave face downward.
In order to ensure that the machine has a higher machining accuracy, the guide rail, the straight line with a higher precision and good motion stability.During the operation of the equipment, a lot of corrosive dust and smoke will occur in the processing of the processed workpiece. Based on the long-term accumulation of smoke and dust on the surface of the guide rail and straight spool, the machining accuracy of the equipment will be greatly affected, and will form corrosion points on the surface of the guide rail straight spool, shortening the service life of the equipment.So every half a month clean machine guide.Turn off the machine before cleaning.
Movement system in the operation of a period of time, the movement of screws, coupling will be loose, will affect the stability of mechanical movement, so in the operation of the machine to observe the transmission components have abnormal sound or abnormal phenomenon, to find the problem to consolidate and maintain in time.The machine should be consolidated with things one by one over time.The first consolidation should be about one month after the equipment is used.
Machine light path system is made up of mirror reflection and gather the mirror gather together, gather lens in the optical path does not exist deviation problem, but the three mirrors is composed of mechanical part is fixed, the possibility of deviation is bigger, although usually not offset, but claims that the user must check before every job light path is normal.